Equipment & Supplies List

ATLAS Standard Single Cart / Half Cart with defendAir Intelligent Lock & Seal System – Driessen – Dark Blue

This is a fully refurbished and certified half size / single cart conforming to ATLAS standards. These canisters were constructed by Driessen and feature standard drawer runner pitch to accommodate 7 standard drawers or 14 service trays, 2 wheel braking and dark blue coloured panels. Also available without the defendAir Intelligent Seal and Lock System.

PART NUMBER: TL-060XXX

100mm ATLAS Standard Universal Drawer (Translucent White)

This is a nearly new Polypropylene plastic aviation drawer for use in carts and canisters conforming to ATLAS design standards. It is a translucent white design manufactured by Airflow International. It features 2 wide, square runners on each side with 60mm spacing and a label placing area. These are immediately available and can be supplied either unbranded or with customised branding.

DIMENSIONS: 375mm (l) x 270mm (w) x 100mm (h)

PART NUMBER: AUDP-1100-TW

115mm ATLAS Standard Universal Drawer (Translucent White)

This is a nearly new Polypropylene plastic aviation drawer for use in carts and canisters conforming to ATLAS design standards. It is a translucent white design manufactured by LCL. It features 2 runners on each side with 60mm spacing. These are immediately available and can be supplied either unbranded or with customised branding.

DIMENSIONS: 375mm (l) x 270mm (w) x 115mm (h)

PART NUMBER: AUDP-1115-TW

110mm ATLAS Standard Universal Drawer 2 (Translucent Blue)

This is a nearly new Polypropylene plastic aviation drawer for use in carts and canisters conforming to ATLAS design standards. It is a translucent blue design manufactured by LCL. It features 2 runners on each side with 60mm spacing and a label placing area. These are immediately available and can be supplied either unbranded or with customised branding.

DIMENSIONS: 375mm (l) x 270mm (w) x 110mm (h)

PART NUMBER: AUDP-2110-TB

110mm ATLAS Standard Universal Drawer 2 (Translucent White)

This is a nearly new Polypropylene plastic aviation drawer for use in carts and canisters conforming to ATLAS design standards. It is a translucent white design manufactured by LCL. It features 2 runners on each side with 60mm spacing and a label placing area. These are immediately available and can be supplied either unbranded or with customised branding.

DIMENSIONS: 375mm (l) x 270mm (w) x 110mm (h)

PART NUMBER: AUDP-2110-TW

110mm ATLAS Standard Universal ‘Vario’ Drawer (Translucent Clear)

This is a nearly new Polypropylene plastic aviation drawer for use in carts and canisters conforming to ATLAS design standards. It is a translucent clear design manufactured by Driessen. It features 4 wide runners on each side with 30mm spacing. These are immediately available and can be supplied either unbranded or with customised branding.

DIMENSIONS: 375mm (l) x 270mm (w) x 110mm (h)

PART NUMBER: ‘VARIO 120’ / DV4000 series / AUDP-V110-TC

Plastic Service Tray (Copper finish)

This is a nearly new plastic service tray for use in carts and canisters conforming to ATLAS design standards. It has a metallic ‘copper’ finish.

DIMENSIONS: 380mm (l) x 273mm (w) x 16mm (h)

PART NUMBER: SRVTRY-1

ATLAS Standard Cart/Trolley Ice Tray Driessen – Dark Grey

This is a nearly new Aluminium ice tray for use in Driessen aviation trolleys and carts conforming to ATLAS standards. These ice trays were manufactured by Driessen and feature a darker grey plastic handle at the front.

DIMENSIONS: 392mm (l) x 275mm (w) x 28mm (h)

PART NUMBER: DD005001

ATLAS Standard Cart/Trolley Ice Tray Driessen – Light Grey

This is a nearly new Aluminium ice tray for use in Driessen aviation trolleys and carts conforming to ATLAS standards. These ice trays were manufactured by Driessen and feature a lighter grey plastic handle at the front.

DIMENSIONS: 392mm (l) x 275mm (w) x 28mm (h)

PART NUMBER: DD053001

ATLAS Standard Cart/Trolley Ice Tray Iacobucci – Dark Grey

This is a nearly new Aluminium ice tray for use in Iacobucci aviation trolleys and carts conforming to ATLAS standards. These ice trays were manufactured by Iacobucci and feature a darker grey plastic handle at the front.

DIMENSIONS: 390mm (l) x 250mm (w) x 30mm (h)

PART NUMBER: ICETRAY-I1

ATLAS Standard Cart/Trolley Diethelm-Keller Ice Tray – Light Grey

This is a nearly new Aluminium ice tray for use in Diethelm-Keller aviation trolleys and carts conforming to ATLAS standards. These ice trays were manufactured by Diethelm-Keller and feature a lighter grey plastic handle at the front.

DIMENSIONS: 380mm (l) x 246mm (w) x 27mm (h)

PART NUMBER: 301370